Breeze, Cirrus, Sebring Convertible & Stratus

Apply parking brake. Remove set screw from side of gear selector knob. Remove gear selector knob, gear selector bezel and wiring. Gear selector bezel snaps on top of center console and indicates gear selector position.
Reinstall gear selector knob and set screw. Ensure gear selector is in Park. Loosen gearshift cable adjuster nut at gear selector. Move manual control lever on transaxle to Park. Manual control lever is lever on transaxle on which gearshift cable is installed.
Ensure gear selector and manual control lever on transaxle is in Park. Tighten gearshift cable adjuster nut at gear selector.
Ensure engine starts only with gear selector in Park or Neutral and detent position for Neutral and Drive are within gate areas on gear selector. If engine starts with gear selector in any other gear range except Park and Neutral, or detents are not within gate areas, readjust gearshift cable. Reinstall gear selector bezel.