Valve Body: Installation

To install, reverse removal procedure. Ensure governor tubes are fully seated. Install valve body bolts in original location and tighten to specification. See TORQUE SPECIFICATIONS .
Install NEW oil filter assembly and gasket. Tighten screws to specification. Apply RTV sealant on oil pan-to-transaxle surface and below head of oil pan bolts before installing. Tighten bolts to specification. Fill transaxle with appropriate ATF. See LUBRICATION .

Fig 1: Removing Cooler Bypass Valve

Courtesy of DAIMLERCHRYSLER CORPORATION

Fig 2: Disconnecting Parking Rod From Valve Body

Courtesy of DAIMLERCHRYSLER CORPORATION

Fig 3: Removing Parking Rod From Valve Body

Courtesy of DAIMLERCHRYSLER CORPORATION

Fig 4: Removing Valve Body

Courtesy of DAIMLERCHRYSLER CORPORATION