Test NS-SEL: No Start Test Selection
- No Start (NS) tests may be performed if a no response or no start problem exists. Perform appropriate NS test in accordance with the problem to be checked. See NO START TEST MENU
table.NO START TEST MENU
Application Test No Response Condition NS-1 Checking Engine Mechanical Systems NS-2 Checking Fuel System NS-3 Fuel Pump Inoperative NS-4 High Fuel Pressure NS-5 Low Fuel Pressure NS-6 No Crank Condition NS-7 Qualifying A No Start Condition NS-8 Start & Stall Condition NS-9
NOTE:
On models equipped with a Sentry Key Immobilizer Module (SKIM), if PCM has been replaced, the secret key data must also be updated to enable engine starting. For updating secret key data, see POWERTRAIN CONTROL MODULE PROGRAMMING
under PROGRAMMING.