Both Doors Will Not Unlock Using Transmitter

1. Unlock driver's door. Using a voltmeter, backprobe BCM 20-pin connector, terminal No. 4 (Dark Blue/White wire). See Fig 1 . Check for a voltage pulse while pressing transmitter UNLOCK button. If there is no voltage pulse, replace BCM. See BODY CONTROL MODULE (BCM)  under REMOVAL & INSTALLATION. If voltage pulse is present, repair circuit between BCM and driver's door lock motor. See WIRING DIAGRAMS  .
2. Check for voltage pulse at BCM 20-pin connector, terminal No. 1 (Pink/Black wire) while pressing transmitter UNLOCK button. If there is no voltage pulse, replace BCM. See BODY CONTROL MODULE (BCM)  under REMOVAL & INSTALLATION. If voltage pulse is present, repair Pink/Black wire between BCM and suspect door lock motor. See WIRING DIAGRAMS  .

Fig 1: Identifying BCM 20-Pin Connector Terminals

Courtesy of CHRYSLER CORP.