FixVault
Home › Chrysler › 2000 › Sebring Limited › Repair and Diagnosis › Engine Performance › System › Engine Controls - Self-Diagnostics - Convertible › Programming › Powertrain Control Module Programming › Programming PCM & Clearing DTCs From ABS & SRS Modules

Programming PCM & Clearing DTCs From ABS & SRS Modules

  1. Connect scan tool to Data Link Connector (DLC). DLC is located below driver's side of instrument panel, near driver's side kick panel. See Figure .
  2. Using scan tool, enter correct VIN and mileage into PCM. Using scan tool manufacturer's instructions, clear DTCs from ABS and SRS modules.
About FixVault