Section 87 (Speed Control - Except Coupe): Switch: Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
The speed control switch is mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING:
IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO RESTRAINTS - EXCEPT COUPE
.
- Connect the electrical connector.
- Install switch and tighten the screws to 1.6 N.m (15 ins. lbs.). Make sure rubber seal is in place around switch. See Figure.
- Install airbag, refer to RESTRAINTS - EXCEPT COUPE .
- Install the negative battery cable.