FixVault
Home › Chrysler › 2000 › Voyager Base, 2.4 B › Repair and Diagnosis (Single Page) › Accessories & Equipment › Cruise Control Systems › Operation › System Controls › To Set Speed Control

To Set Speed Control

Press ON/OFF switch to turn on speed control system. Accelerate to desired speed (30-85 MPH) and press SET switch. Vehicle speed will be stored and maintained by PCM until speed control is disengaged.

NOTE: Speed control system will automatically disengage when vehicle speed increases or decreases at a rate of 10 MPH per second or excessive engine RPM is sensed.
About FixVault