FixVault
Home › Chrysler › 2000 › Voyager Base, 3.3 G › Repair and Diagnosis › Engine Performance › System › Engine Controls - Tests W/Codes › Programming › Powertrain Control Module Programming › Programming PCM & Clearing DTCs From ABS & SRS Modules

Programming PCM & Clearing DTCs From ABS & SRS Modules

  1. Connect scan tool to Data Link Connector (DLC). The DLC is located below driver's side of instrument panel. See Figure .
  2. Using scan tool, enter correct VIN and mileage into PCM . Using scan tool manufacturer's instructions, clear DTCs from ABS and SRS modules.
About FixVault