FixVault
Home › Chrysler › 2000 › Voyager Base, 3.3 R › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Modules › System Tests › Interior Lighting › Shorted Passenger's Door Ajar Circuit

Shorted Passenger's Door Ajar Circuit

  1. Disconnect passenger's door ajar switch. Using scan tool, read passenger's door ajar switch status. If scan tool displays PASSDOOR AJAR SWITCH: CLOSED, go to next step. If scan tool does not display PASSDOOR AJAR SWITCH: CLOSED, replace passenger's door ajar switch.
  2. Disconnect Body Control Module (BCM) connector "B". BCM is located with junction block under driver's side instrument panel. See Figure . Using scan tool, read passenger's door ajar switch status. If scan tool displays PASSDOOR AJAR SWITCH: CLOSED, replace BCM. If scan tool does not display PASSDOOR AJAR SWITCH: CLOSED, repair short to ground in Tan/Red wire between passenger's door ajar switch and BCM.
About FixVault