Ignition Switch

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.

Remove ignition switch. See IGNITION SWITCH under REMOVAL & INSTALLATION. Check continuity between appropriate switch terminals with switch in specified position. See IGNITION SWITCH CONTINUITY table. See Fig 1 . If continuity is not as specified, replace ignition switch.

IGNITION SWITCH CONTINUITY

Switch Position

⁽¹⁾ Continuity Between Terminals No.

ACC

5 & 6

LOCK

⁽²⁾

OFF

1 & 5

RUN

1, 4, 5 & 6; 7 & 10

START

1, 4, 5 & 9

⁽¹⁾	With key in ignition, continuity exists between terminals No. 2 and 3 for key-in switch.

⁽²⁾	Continuity should not exist between any terminals.

Fig 1: Identifying Ignition Switch Connector Terminals

Courtesy of CHRYSLER CORP.