MULTIFUNCTION Switch
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Disconnect multifunction switch connector. Check continuity between appropriate switch terminals with switch in specified position. See MULTIFUNCTION SWITCH TESTING and WIPER/WASHER SWITCH CONTINUITY tables. See Fig 1 and Fig 2 . If continuity is not as specified, replace switch.
MULTIFUNCTION SWITCH TESTING
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Turn Signals | ||
| Neutral | 1 & 2 | |
| Left | 6 & 7 | |
| Right | 7 & 8 | |
| Hazards On | 2 & 3; 4 & 5; 6 & 7; 7 & 8 | |
| Headlights | ||
| Low Beam | 5 & 7 | |
| High Beam | 4 & 7 | |
| Flash-To-Pass | 4 & 6 | |
WIPER/WASHER SWITCH CONTINUITY
| Switch Position | Between Terminals No. | K/Ohms | |||
|---|---|---|---|---|---|
| Off | 1 & 3 | 300 Or More | |||
| Delay Level | |||||
| 1 | 1 & 3 | 9.72 | |||
| 2 | 1 & 3 | 8.22 | |||
| 3 | 1 & 3 | 6.61 | |||
| 4 | 1 & 3 | 5.12 | |||
| 5 | 1 & 3 | 3.67 | |||
| 6 | 1 & 3 | 2.22 | |||
| Low | 1 & 3 | 1.02 | |||
| High | 1 & 3 | 0.51 | |||
| Wash | 1 & 2 | (1) | |||
|
|||||