FixVault
Home › Chrysler › 2001 › Prowler › Repair and Diagnosis › Body & Frame › Door Locks › Power Door Locks & Remote Keyless Entry System › Programming › Automatic Door Locks › 2000 Models Without Using DRB III®

2000 Models Without Using DRB III®

  1. Close all doors.
  2. Cycle ignition switch from OFF to RUN position 4 times, leaving ignition switch in OFF position after the fourth cycle.
  3. Press either door lock button to LOCK the doors. This procedure will reverse the automatic door lock mode, ENABLE to DISABLE or DISABLE to ENABLE. If the present mode is undesirable, repeat procedure to arrive at the desired option. A single chime will sound to indicate programming completed.
About FixVault