Section 6 (Manual Heating & A/C System): Specifications
WARNING: This page is about a different car, the 2001 Plymouth Prowler, 2000 Plymouth Prowler, 1999 Plymouth Prowler, and 1997 Plymouth Prowler. However, it is still accessible from the selected car via links, so may be relevant.
NIPPONDENSO COMPRESSOR MODEL 10PA17
| Application | Specifications | |
|---|---|---|
| Displacement Per Revolution | 85.7 cc (5.2 cu. in) | |
| Maximum Allowable RPM | 12000 RPM | |
| Maximum Allowable Continous RPM | 10000 RPM | |
| Refrigerant | R-134a | |
| Oil | ND-Oil-8 150 cc (5.08 fl. oz.) | |
| Weight | 39.2 N.m (8.82 lbs., 4.0 Kgf.) | |
| Compressor Clutch | ||
| Air Gap | .355-.660 mm. (.014-.026") | |
| Rated Voltage | 12 VDC | |
| Minimum Break Away Torque | 31.4 N.m (23 ft. lbs) at 12 VDC | |
| Minimum Engagement Voltage | 7.5 at air gap .5 mm REF | |
| Power Consumption | 50 WATTS MAX. | |
| Pulley Diameter | 110 mm DIA. (4.3") | |
NOTE:
Prowler uses a Body Control Module (BCM) to control mode door operation. The BCM also monitors evaporator 3-wire fin sensor and sends A/C clutch request signal over CCD to PCM.