Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application |
Ft. Lbs. (N.m) |
| Axle Shaft Support Bracket Bolt (3.0L) |
26-33 (35-45) |
| Center Member Assembly |
| Front Bolt |
58-80 (78-108) |
| Rear bolt |
52-80 (70-108) |
| Clutch Cover-To-Flywheel Bolt |
12-16 (16-22) |
| Clutch Release Cylinder-To-Transaxle Bolt |
11-15 (15-21) |
| Damper Assembly-To-Clutch Master Cylinder (3.0L) |
30-40 (40-54) |
| Flywheel-To-Crankshaft Bolts |
| 2.4L |
94-102 (127-137) |
| 3.0L |
53-55 (72-76) |
| Hydraulic Line Fitting-To-Clutch Release Cylinder (Union Bolt) |
15-18 (21-25) |
| Inspection Plate Bolt |
| To Engine |
|
| To Transaxle |
16-22 (22-30) |
| Left Side Transaxle Mount Through-Bolt |
51-69 (69-93) |
| Left Side Transaxle Mount-To-Transaxle Bolt |
37-47 (50-64) |
| Lower Ball Joint Nut |
72-87 (98-118) |
| Lower Transaxle Mount Through-Bolt |
30-47 (40-50) |
| Roll Stopper Through-Bolt |
30-47 (40-50) |
| Roll Stopper-To-Body Bolt |
30-47 (40-50) |
| Stabilizer-To-Strut Nut |
25-40 (34-54) |
| Starter Bolt |
20-24 (27-33) |
| Tie Rod End Nut |
18-34 (25-33) |
| Transaxle Drain & Fill Plug |
22-25 (30-34) |
| Transaxle-To-Engine Mounting Bolt |
| 2.4L |
32-39 (43-53) |
| 3.0L |
| Engine Side (Middle) Bolt |
58-72 (78-98) |
| Engine Side (Lower) Bolt |
21-30 (29-41) |
| Transaxle Side (Upper) Bolt |
48-61 (65-83) |
| INCH Lbs. (N.m) |
| Clutch Master Cylinder Mounting Nut |
97-133 (11-15) |
| Clutch Pedal Assembly Mounting Bolt |
89-124 (10-14) |
| Clutch Pedal Push Rod Lock Nut |
97-133 (11-15) |
| Hydraulic Line Fitting |
115-150 (13-17) |
| Shift & Select Cable Assembly-To-Firewall Bolt |
89-124 (10-14) |