No FCM Bus Messages Received
NOTE:
After making any repairs, perform BODY VERIFICATION TEST
under VERIFICATION TESTS.
- Turn ignition on. Using scan tool, attempt to communicate with Front Control Module (FCM). If scan tool identifies or communicates with FCM, go to next step. If scan tool does not identify or communicate with FCM, go to NO RESPONSE FROM FRONT CONTROL MODULE under COMMUNICATIONS.
- Using scan tool, erase DTCs. Turn ignition on and wait approximately one minute. Recheck for DTCs. If NO FCM BUS MESSAGES RECEIVED resets, replace instrument cluster. See ANALOG INSTRUMENT PANELS - CARAVAN, TOWN & COUNTRY, & VOYAGER article. If NO FCM BUS MESSAGES RECEIVED does not reset, test is complete.