VTSS Does Not Trip From Passenger Front Door
NOTE:
After making any repairs, perform VEHICLE THEFT SECURITY SYSTEM VERIFICATION TEST
under VERIFICATION TESTS.
Possible Causes:
- Check Scan Tool For Passenger Door Ajar Response
- BCM - No VTSS Trip From Passenger Door
Testing
- Turn ignition off. Connect scan tool to Data Link Connector (DLC). Using scan tool, read PASS DOOR AJAR SW status. Open passenger door. If scan tool displays CLOSED, replace BCM. See BODY CONTROL MODULE under REMOVAL & INSTALLATION. If scan tool displays OPEN, perform PASS DOOR AJAR CKT OPEN test under DOOR AJAR SYSTEM.