FixVault
Home › Chrysler › 2002 › Intrepid Base › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Door Trim Panel › Installation (Rear)

Installation (Rear)

  1. Place trim panel in position on door.
  2. Connect the courtesy lamp.
  3. Connect the wiring harness clips to the trim panel.
  4. Connect the power window switch wire harness connector.
  5. Connect the rear door speaker wire connect.
  6. Connect the remote handle linkage.
  7. Hook the trim panel over the sheet metal flange.
  8. Insert the forward 4-way alignment guide into position. Insert the rearward 2-way alignment guide into position.
  9. Engage the 3 retaining clips to attach door trim panel to door sheet metal inner panel, up to 3 ratchet clicks.
  10. Install 3 screws to the bottom of the door. See TORQUE SPECIFICATIONS  .
  11. Install screw in the remote bezel and close the trim plug.
  12. Install screw in pull cup, and close the trim plug.
About FixVault