Diagnostic Mode

To enter diagnostic mode, a vehicle speed must be below 10 km/h (6 MPH) and no ABS/TCS condition present. If vehicle speed is not below 10 km/h (6 MPH), a "No Response" message could be displayed by the DRBIII®. The following are characteristics of diagnostic mode:

• The amber ABS warning indicator will blink rapidly (about 1/2 second ON and 1/2 second OFF). If a hard trouble code, such as CAB Power Feed Circuit Failure code is present, the indicator will be illuminated without blinking until the trouble condition is cleared.
• Antilock operation is disabled.
• Valve actuation with the DRBIII® is disabled when the vehicle speed is above 8 km/h (5 MPH). If valve actuation is attempted above 8 km/h (5 MPH), a "No Response" message will be displayed on the DRBIII®.