FixVault
Home › Chrysler › 2002 › Intrepid Base › Repair and Diagnosis › External Pages › Different car › Section 80 (Seat System) › Seat Track & Recliner Assembly › Installation

Seat Track & Recliner Assembly: Installation

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place seat adjuster in position on seat cushion pan.
  2. Connect wire harness fasteners to the cushion pan.
  3. Install bolts attaching seat adjuster to cushion pad.
  4. Install seat back.
  5. Install bolt attaching seat back recliner to seat back on each side of seat. Tighten bolt to 8 N.m (71 in.lbs.) torque.
  6. Install the seat cushion side shields (Refer to SEAT SIDE SHIELD  ).
About FixVault