FixVault
Home › Chrysler › 2002 › Neon LE, Automatic › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Modules › System Tests › Vehicle Theft Security System › Parking Lights Fail To Flash During Alarm

Parking Lights Fail To Flash During Alarm

  1. Ensure parking lights are operating properly. Repair parking lights as necessary. If parking lights are operating properly, go to next step.
  2. Turn ignition off. Disconnect 26-pin Remote Keyless Entry (RKE) module connector, located under center of instrument panel top cover. See Figure . Connect a 12-volt test light between RKE module connector terminal No. 2, headlight switch output circuit and ground. See Figure . Turn parking lights on. If test light illuminates, replace RKE module. See REMOTE KEYLESS ENTRY MODULE  under REMOVAL & INSTALLATION. If test light does not illuminate, repair open wire. After making any repairs, perform VTSS VERIFICATION TEST  under VERIFICATION TESTS.
About FixVault