Shift Mechanism: Removal

WARNING: This page is about a different variant/trim than selected.

Lift up on gearshift boot to disengage retainer tabs from console.
Push down on knob and rotate clockwise to remove knob/boot assembly. (Fig 1).

Fig 1: Removing/Installing Gearshift Knob/Boot
Courtesy of DAIMLERCHRYSLER CORP.
Remove the center console assembly as shown in (Fig 2).

Fig 2: Removing/Installing Center Console
Courtesy of DAIMLERCHRYSLER CORP.
Remove crossover cable retaining clip and disconnect from shift lever. (Fig 3).

Fig 3: Removing/Installing Crossover Cable At Shifter Assembly
Courtesy of DAIMLERCHRYSLER CORP.
Remove selector cable retaining clip and disconnect from shift lever. (Fig 4).

Fig 4: Removing/Installing Selector Cable At Shifter Assembly
Courtesy of DAIMLERCHRYSLER CORP.
Remove four shifter assembly-to-floor pan nuts and remove shifter from vehicle. (Fig 5).

Fig 5: Removing/Installing Shifter Assembly
Courtesy of DAIMLERCHRYSLER CORP.