FixVault
Home › Chrysler › 2002 › Neon LE, Standard › Repair and Diagnosis › Transmission › Manual Trans › Manual Transmissions › Axle Seal › Installation

Axle Seal: Installation

  1. Clean axle shaft seal bore of any excess sealant.
  2. Align axle shaft seal with axle shaft seal bore.
  3. Install axle seal on tool #6709 and C-4171 and insert into axle shaft seal bore.
  4. Tap seal into position until seated against transaxle case.
  5. Install axle shaft. Refer to AXLE SHAFTS for the correct procedures.
About FixVault