Power Module (Rear): Installation
WARNING: This page is about a different car, the 2002 Dodge Grand Caravan and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Position the blower power module into the rear HVAC unit housing. Install and tighten the 2 screws that secure the blower power module to the rear HVAC unit housing. See TORQUE SPECIFICATIONS .
- Reconnect the blower motor pigtail wire to the blower power module connector receptacle. Reconnect the rear HVAC wire harness connector for the blower power module to the module connector receptacle.
- Reinstall the right quarter trim panel and right D-pillar trim panel onto the quarter inner panel. Reconnect the negative battery cable.