FixVault
Home › Chrysler › 2003 › Intrepid SXT › Repair and Diagnosis (Single Page) › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Air Conditioning Controls › Power Module › Installation

Power Module: Installation

  1. Install the power module in the HVAC housing.
  2. Install the two screws that secure the power module to the HVAC housing and tighten to 2.2 N.m (20 in. lbs.).
  3. Plug in the harness connector to the power module.
  4. Install the lower right underpanel silencer/duct.
  5. Connect the negative battery cable remote terminal to the remote battery post.
About FixVault