FixVault
Home › Chrysler › 2003 › Intrepid SXT › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Air Conditioning Controls › A/C Heater Control › Installation

A/C Heater Control: Installation

  1. Place the control into place on the back of the instrument panel center bezel and install the six retaining screws to the a/c heater control.
  2. Connect the two electrical connectors to the back of the control head and traction control switch (if equipped).
  3. Install the instrument panel center bezel.
  4. Install the ash receiver assembly, if necessary.
  5. Connect the negative battery cable remote terminal to the remote battery post.
  6. To allow the BCM to learn the new control head, perform HVAC system calibration. (Refer to STANDARD PROCEDURE - HVAC SYSTEM CALIBRATION ).
About FixVault