FixVault
Home › Chrysler › 2003 › PT Cruiser Base, Automatic › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Power Door Lock System › Remote Keyless Entry Module › Installation

Remote Keyless Entry Module: Installation

  1. Install the RKE module on instrument panel.
  2. Connect the wiring harness connector to the RKE module. Slide locking tab of the wiring connector sideways to lock tab.
  3. Install the two screws holding the RKE module to the instrument panel assembly.
  4. Install the instrument panel top cover.
  5. Connect the battery negative cable.
About FixVault