FixVault
Home › Chrysler › 2003 › Town & Country Base › Repair and Diagnosis (Single Page) › Accessories & Equipment › Anti-Theft Systems › Power Door Lock System › Remote Keyless Entry Module › Removal

Remote Keyless Entry Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove instrument panel top cover (Refer to INSTRUMENT PANEL TOP PAD - REMOVAL ).
  3. Remove screws holding RKE module to instrument panel.
  4. Disconnect wire connector from RKE module (Fig 1 ).
    Fig 1: Removing RKE Module
    G02676816Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the RKE module from vehicle.
About FixVault