FixVault
Home › Chrysler › 2003 › Voyager Base, 2.4 B › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Sentry Key Immobilizer Module › Installation

Sentry Key Immobilizer Module: Installation

  1. Slip the SKIM antenna ring around the ignition switch lock cylinder housing. Rotate the SKIM downwards and then towards the steering column.
  2. Install the one screws securing the SKIM to the steering column.
  3. Engage the steering column wire harness from the Sentry Key Immobilizer Module (SKIM).
  4. Install the steering column upper and lower shrouds. Refer to COLUMN SHROUD - INSTALLATION .
  5. Install the Lower Instrument Panel Cover. Refer to LOWER INSTRUMENT PANEL COVER - INSTALLATION .
  6. Connect the battery negative cable.
About FixVault