FixVault
Home › Chrysler › 2003 › Voyager Base, 2.4 B › Repair and Diagnosis › Electrical › Charging Systems › Battery System › Battery Cables › Installation

Battery Cables: Installation

  1. Position the battery cable in the vehicle.
  2. One at a time, trace and install the battery cable retaining fasteners and routing clips until the desired cable is properly installed in the engine wire harness assembly.
  3. Install the tape on the engine wire harness assembly.
  4. Install the battery thermowrap (if equipped) on the battery tray.
  5. Connect the negative battery cable terminal.
About FixVault