FixVault
Home › Chrysler › 2003 › Voyager Base, 2.4 B › Repair and Diagnosis › Electrical › Gauges › Overhead Console › Compass/Mini-Trip Computer › Installation

Compass/Mini-Trip Computer: Installation

  1. Position the compass mini-trip computer module in the overhead console.
  2. Install the ten screws holding the compass mini-trip computer module in the overhead console.
  3. Install the overhead console (Refer to INSTALLATION  ).
  4. Connect the battery negative cable.
NOTE: If a new EVIC module has been installed, the compass will have to be calibrated and the variance set. Refer to STANDARD PROCEDURE - COMPASS VARIATION ADJUSTMENT  and STANDARD PROCEDURE - COMPASS CALIBRATION  .
About FixVault