Controller Antilock Brake: Removal
- Disconnect the battery cables.
- Remove the battery (Refer to
BATTERY - REMOVAL
).
- Disconnect the vacuum hose connector at the tank built into the battery tray.
- Remove the screw securing the coolant filler neck to the battery tray.
- Remove the battery tray (Refer to
TRAY - REMOVAL
).
- Pull up on the CAB connector lock and disconnect the 24-way electrical connector (Fig 1
).
Courtesy of DAIMLERCHRYSLER CORP.
- Disconnect the pump/motor connector from the CAB.
- Remove the screws securing the CAB to the HCU (Fig 2
)
Courtesy of DAIMLERCHRYSLER CORP.
- Pull CAB straight forward off HCU.