Removal - 3.3/3.8L

Disconnect the negative battery cable.
Remove the throttle and speed control cables from clip.
Remove 2 bolts from the Power steering reservoir to intake manifold.
Loosen the lower nut for the power steering reservoir from stud on ignition coil bracket.
Reposition the Power steering reservoir (Fig 1 ).

Fig 1: Removing Ignition Coil Bracket 3.3/3.8L
Courtesy of DAIMLERCHRYSLER CORP.
Remove the ignition cables from the ignition coil.
Disconnect the electrical connector from the ignition coil.
Remove 2 nuts from the ignition coil studs.
Remove 2 bolts from ignition coil, remove coil.