FixVault
Home › Chrysler › 2004 › Crossfire Automatic › Repair and Diagnosis (Single Page) › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System & Automatic Transmission Cooling System › Engine › Radiator Fan Control Module › Installation

Radiator Fan Control Module: Installation

  1. Position the radiator fan control module on the inner fender well studs.
  2. Install the upper and lower retaining nuts and tighten to 10 N.m (89 in. lbs.).
  3. Connect the radiator fan control module harness connector.
  4. Connect the negative battery cable.
About FixVault