FixVault
Home › Chrysler › 2004 › Crossfire Automatic › Repair and Diagnosis › Engine Mechanical › Fuel System › Map Sensor › Installation

Map Sensor: Installation

  1. Install the MAP sensor.
  2. Install the bolt (1).
    Fig 1: Installing MAP Sensor
    G01860793Courtesy of DAIMLERCHRYSLER CORP.
  3. Connect the Manifold Absolute Pressure (MAP) harness connector.
  4. Install the air cleaner housing. See 3.2L V6 article.
  5. Connect the negative battery cable.
About FixVault