Rack & Pinion Power Steering System: Pump: Installation

Install the reservoir if it was removed, by inserting the c-clip using a suitable tool.
Install the power steering pump and bolts (3) to the engine block. Tighten to 20 N.m (15 ft. Ibs.).
Install the high-pressure hose (2) on the pump.
Install the return hose on the pump.
Install the power steering supply line (6) to the reservoir.

Fig 1: Installing Power Steering Pump
Courtesy of DAIMLERCHRYSLER CORP.
Install the accessory drive belt (1). COOLING SYSTEM (MECHANICAL) .
Fill the power steering pump reservoir and then bleed the system by performing the initial operation. See STANDARD PROCEDURE .