FixVault
Home › Chrysler › 2004 › Crossfire Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Overhaul - Nag1 Automatic Transmission › Shift Lever Assembly › Installation

Shift Lever Assembly: Installation

  1. Connect the shift rod to the shift mechanism and install the retainer clip.
  2. Position the shift mechanism (1) in the vehicle.
  3. Install the retaining bolts (3). Tighten the bolts to 7 N.m (65 in. lbs.).
  4. Connect the wire harness (2) connectors at the rear of the shift mechanism.
  5. Install the front center console. See BODY article.
  6. Install the gear shift lever handle.
About FixVault