FixVault
Home › Chrysler › 2004 › Crossfire Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 4 (Engine Cooling System & Automatic Transmission Cooling System) › Engine › Radiator Fan Control Module › Removal

Radiator Fan Control Module: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Disconnect the radiator fan control module harness connector (2).
  3. Remove the retaining nuts at the top and bottom of the cooling fan module (1).
  4. Remove the cooling fan module from the engine compartment.
    Fig 1: Disconnecting Radiator Fan Control Module Harness Connector
    G01837786Courtesy of DAIMLERCHRYSLER CORP.
About FixVault