FixVault
Home › Chrysler › 2004 › Intrepid SE › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Interior Trim › Headliner › Installation

Interior Trim: Headliner: Installation

NOTE: DO NOT remove headliner membrane from vehicle. No additional use of any additional adhesives is needed.
  1. Place headliner in proper position in vehicle.
  2. Engage the locator flexible clip to attach head-liner to roof above rear window and press on the membrane to ensure contact.
  3. Install upper right and left quarter trim panels.
  4. Install front and rear assist handles (if equipped).
  5. Install right and left sun visors and retainers.
  6. Install upper right and left B-pillar trim panels.
  7. Install wire harness along A-pillar and connect wire connector to the fuse panel.
  8. Install overhead console or front interior lights
  9. Install right and left A-pillar trim panels.
  10. Install seat, and return seats to up the right position.
  11. Engage the hook and loop patch fasteners around the sun roof opening.
About FixVault