FixVault

Removal - Intrepid

  1. Release hood latch and open hood.
  2. Remove push pin fasteners attaching bottom of fascia (air dam) to lower crossmember (Fig 1 ).
    Fig 1: Air Dam
    G03498623Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove fasteners attaching fascia to splash shields (Fig 2 ).
    Fig 2: Front Bumper Fascia
    G03498624Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove push pin fasteners attaching the fascia to upper radiator closure panel.
  5. Pull the sides of the fascia outwards to disengage fascia from drive pins then pull fascia forward.
  6. Disconnect fog lamp wire connectors, if equipped.
  7. Remove fascia from vehicle.