FixVault
Home › Chrysler › 2004 › Intrepid SE › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission (Service Information) › Removal & Installation › Valve Body › Installation

Valve Body: Installation

  1. Install valve body into position and start bolts. Torque valve body-to-transaxle case bolts to 105 INCH Lbs. (12 N.m). See Figure .
  2. Install transaxle oil filter. See Figure .
  3. Make sure oil pan and case rail are clean and dry. Install an 1/8" bead of RTV to the transaxle oil pan and install to case. Tighten bolts to 17 ft. lbs. (23 N.m). See Figure .
  4. Lower vehicle and connect the TRS connector.
  5. Connect solenoid/pressure switch assembly connector.
  6. Lower vehicle.
  7. Fill transaxle with ATF+4 (Automatic Transmission Fluid-Type MS-9602). Verify proper fluid level.
About FixVault