Window Regulator: Removal
- Remove flag cover, door trim panel, water shield as necessary, and pull cup support bracket. (Refer to TRIM PANEL
)
- Slide glass from regulator roller channel.
- Disconnect power window motor wire connector.
- Loosen bolt attaching regulator support brace to door panel.
- Remove screw and bolt heads from keyhole slots in door panel.
- Loosen bolts attaching regulator to door panel.
- Remove regulator from door panel.
- Slide regulator rearward and rotate forward end of roller channel through access hole in door panel (Fig 1
).
Courtesy of DAIMLERCHRYSLER CORP.