Cluster Bezel: Removal
- Open hood and disconnect the negative battery-cable remote terminal from the remote battery post (Fig 1
).
Courtesy of DAIMLERCHRYSLER CORP.
- Remove the instrument panel left end cap.
- Remove steering column shroud cover.
- Tilt the steering column down into the lowest position.
- Remove one screw (Concorde/300M) to cluster bezel
- Remove the items to expose bezel mounting screws. Items vary depending on model.
- Remove two screws over upper cluster bezel in instrument panel brow area and all remaining attaching screws.
- Using a trim stick (special tool #C-4755), gently pry out on the instrument panel cluster bezel, disconnect headlamp switch connector, and remove.