FixVault
Home › Chrysler › 2004 › Intrepid SXT › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Engine Block Heater › Installation

Engine Block Heater: Installation

  1. Thoroughly clean cylinder block heater cavity.
  2. Insert heater assembly into block such that mounting hole is located below heater terminals.
  3. Install mounting screw and tighten to 12 N.m (105 in.lbs.).
  4. Attach power cord to heater.
    CAUTION: To prevent damage, the power cord must be secured in its retainer clips, and not positioned so it could contact linkages or exhaust manifolds.
  5. Lower vehicle.
About FixVault