FixVault
Home › Chrysler › 2004 › PT Cruiser Base, Automatic › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Body › Liftgate › Liftgate Outside Handle › Installation

Liftgate Outside Handle: Installation

  1. Place liftgate outside handle into position. Remove protected cover from the two side tape Figure).
  2. Install handle fasteners. Tighten two nuts to 7 N.m (60 in. lbs.).
  3. Install liftgate control assembly onto liftgate.
  4. Connect latch linkages and electrical connectors Figure).
  5. Install liftgate trim panel.
About FixVault