FixVault
Home › Chrysler › 2004 › PT Cruiser Base, Automatic › Repair and Diagnosis › Engine Performance › Ignition System › Ignition Control › Knock Sensor › Removal › Removal - 1.6L

Removal - 1.6L

  1. Remove air cleaner assembly cover.
  2. Disconnect the negative battery cable.
  3. Disconnect the electrical connector for the sensor.
    Fig 1: Identifying Wiring Connector
    G01858319Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Locating Knock Sensor
    G01858320Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove knock sensor. The knock sensor is located under the intake manifold.
About FixVault