FixVault
Home › Chrysler › 2004 › PT Cruiser Base, Standard › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Emission Control System › EVAP/Purge Solenoid › Installation › Turbo

EVAP/Purge Solenoid: Installation: Turbo

  1. Install the 2 vacuum lines. See Figure.
  2. Connect and lock the electrical connector to the purge solenoid. See Figure.
  3. Install solenoid to the mounting bracket. See Figure.
  4. Connect the negative battery cable.
About FixVault