FixVault
Home › Chrysler › 2004 › Pacifica AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Door Module › Removal

Door Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the trim panel from the front door (Refer to TRIM PANEL ).
  3. Remove the mounting fasteners (Fig 1).
    Fig 1: Removing Door Module From Front Door Trim Panel
    G03571417Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the door module from the front door trim panel.
About FixVault