FixVault
Home › Chrysler › 2004 › Pacifica AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Powertrain Control Module › Installation

Powertrain Control Module: Installation

  1. Install the PCM.
  2. Install the 3 mounting screws (Fig 1).
  3. Tighten screws.
    NOTE: The PCM connectors are color coded.
  4. Install and lock the 4 electrical connectors (Figure).
  5. Install the left front splash shield.
  6. Install the left front wheel.
  7. Lower vehicle.
    Fig 1: Identifying PCM Assembly
    G03571421Courtesy of DAIMLERCHRYSLER CORP.
  8. Connect the negative battery cable.
About FixVault