FixVault
Home › Chrysler › 2004 › Pacifica AWD › Repair and Diagnosis › Accessories & Equipment › Infotainment › Navigation System & Telecommunication System › Navigation Unit › Removal

Navigation Unit: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove rear floor stowage tray (Refer to INTERIOR ).
  3. Remove mounting fasteners (Fig 1 ).
  4. Disconnect electrical harness connector and antenna cable from navigation unit.
  5. Remove navigation unit from mounting bracket.
    Fig 1: Identifying Navigation Unit
    G03572426Courtesy of DAIMLERCHRYSLER CORP.
About FixVault