FixVault
Home › Chrysler › 2004 › Pacifica AWD › Repair and Diagnosis › Body & Frame › Windows › Door System - Rear › Check Strap › Removal

Check Strap: Removal

  1. Remove screws attaching door check strap to B-pillar (Fig 1).
  2. Remove check strap from B-pillar.
  3. Remove rear door trim panel. (Refer to REMOVAL ).
  4. Remove front door water shield. (Refer to REMOVAL ).
  5. Remove rear door speaker, if equipped.
  6. Remove nuts attaching check strap to door end frame (Fig 2).
  7. Remove check strap from door through speaker hole.
    Fig 1: Removing Screws Attaching Door Check Strap To B-Pillar
    G03571651Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Removing Nuts Attaching Check Strap To Door End Frame
    G03571652Courtesy of DAIMLERCHRYSLER CORP.
About FixVault